Installing Moroccan Tiles

A Step-by-Step Guide on Installing Moroccan Tiles on the Floor

4 minutes, 20 seconds Read

Moroccan tiles, with their captivating patterns and vibrant colors, can bring a touch of exotic elegance to your home’s flooring. Whether you’re renovating a bathroom, kitchen, or an entire living space, installing Moroccan tiles on the floor is a rewarding project that adds character and style. Here’s a step-by-step guide to help you achieve a stunning Moroccan-inspired floor transformation.

1. Gather Your Materials:

Before you begin, make sure you have all the necessary materials and tools:

  • Moroccan tiles of your choice
  • Thin-set mortar
  • Notched trowel
  • Tile spacers
  • Level
  • Tile cutter or wet saw
  • Grout
  • Grout float
  • Sealer (if needed)

2. Prepare the Surface:

Ensure that the surface is clean, dry, and level. Remove any existing flooring and repair any cracks or imperfections in the subfloor. If you’re working on a concrete subfloor, it’s crucial to address any moisture issues before proceeding.

3. Plan Your Layout:

Lay out the Moroccan tiles in the desired pattern before applying any adhesive. This allows you to visualize the final design and make adjustments as needed. Pay attention to the symmetry and alignment of patterns, especially if you have specific focal points

or borders planned.

4. Mix the Thin-Set Mortar:

Follow the tiles manufacturer instructions to mix the thin-set mortar. Consistency is key; aim for a thick, but spreadable, mixture. Use a drill with a mixing attachment for efficiency.

5. Apply Thin-Set Mortar:

Using a notched trowel, apply the thin-set mortar to a small section of the floor. Start in the center of the room and work outward, ensuring an even application. Work in sections that you can complete within 15-20 minutes to prevent the mortar from drying.

6. Place the Tiles:

Carefully press each Moroccan tile into the thin-set mortar, using a slight twisting motion to ensure a good bond. Insert tile spacers between each tile to maintain consistent gaps for grout. Check the level periodically to ensure a flat and even surface.

7. Cut Tiles for Edges:

When you reach the edges or encounter obstacles, use a tile cutter or wet saw to cut the tiles to fit. Measure and mark the tiles accurately before cutting to achieve clean and precise edges.

8. Allow Mortar to Set:

Allow the installed tiles to set in the mortar for at least 24 hours. This time may vary depending on the type of mortar and environmental conditions. Refer to the manufacturer’s guidelines for specific curing times.

9. Apply Grout:

Mix the grout according to the manufacturer’s instructions. Using a grout float, spread the grout over the tiles, ensuring that all gaps are filled. Work the grout into the joints and wipe off excess grout from the tile surfaces with a damp sponge.

10. Clean and Seal:

After the grout has set for about 15-20 minutes, clean the tiles with a damp sponge to remove any grout haze. Allow the grout to cure fully before applying a sealer to protect the Moroccan tiles from stains and moisture.

11. Finishing Touches:

Once the sealer has dried, replace any removed furniture or fixtures. Admire your beautifully transformed space with its Moroccan-inspired floor, bringing an air of exotic charm to your home.

12. Addressing Imperfections:

Inspect the tiles as you go, making sure they align correctly and are level. If you notice any imperfections or misalignments, gently adjust the tiles before the mortar sets completely.

13. Customizing with Borders:

For added flair, consider incorporating decorative borders or framing specific areas with contrasting tiles. This enhances the Moroccan aesthetic and allows you to personalize the design according to your preferences.

14. Grout Color Selection:

Choose the grout color wisely, as it can significantly impact the final look. A contrasting grout can emphasize the individual tiles, while a matching color provides a more cohesive appearance. Consider the overall style you want to achieve before making your selection.

15. Maintaining Consistent Joints:

Maintain consistent joint widths between tiles throughout the installation. This consistency contributes to the overall aesthetic and ensures a professional finish. Adjust tile spacers as needed to achieve uniform gaps.

16. Adding Design Focal Points:

Introduce design focal points by strategically placing tiles with distinctive patterns or colors. This can be especially effective in areas like entryways or at the center of the room, creating visual interest and drawing attention to specific locations.

17. Grouting Techniques:

Experiment with grouting techniques to enhance the visual appeal. Recessed or raised grout lines can add depth and texture to the floor. Be sure to follow the recommended grouting techniques provided by the manufacturer.

Tips and Considerations:

  • Pattern Consistency: Pay attention to pattern consistency, especially if you have intricate designs or borders. Plan and layout your tiles carefully before starting.
  • Sealer Choice: Some Moroccan tiles may benefit from a sealer to protect against stains and enhance durability. Consult with the tile manufacturer for specific recommendations.
  • Maintenance: Moroccan tiles are durable but require proper maintenance. Clean the floor regularly with a neutral pH cleaner suitable for the type of tile you’ve chosen.
  • Professional Assistance: If you’re unsure about any step or encounter challenges, consider consulting a professional tile installer to ensure a flawless and long-lasting result.

By following these steps, you can embark on a rewarding DIY project to install Moroccan tiles on your floor, transforming your space into a captivating and stylish haven inspired by the beauty of North African design.

Your Gateway to High Domain Authority Guest Posting

In the vast digital landscape, where information reigns supreme, the need for a platform that empowers individuals and businesses to share their stories is crucial. emerges as a beacon in this realm, offering a free guest posting service with a remarkable Domain Authority (DA) of 50. In this article, we will delve into the significance of, exploring its features, benefits, and the opportunities it presents for content creators and marketers.

I. Understanding is a user-friendly platform that caters to the growing demand for high-quality guest posting. Its impressive Domain Authority of 50 signifies its credibility and influence in the online space. DA is a metric developed by Moz that predicts how well a website will rank on search engine result pages (SERPs). A higher DA indicates a stronger online presence, making an attractive platform for those seeking visibility.

II. Features of

  1. Free Guest Posting: One of the most appealing aspects of is its commitment to providing a free guest posting service. This democratizes the content creation process, allowing individuals and businesses of all sizes to share their perspectives without any financial barriers.

  2. High Domain Authority (DA 50): The DA of 50 places among the top-tier websites in terms of authority. This not only enhances the visibility of the content posted on the platform but also contributes to better search engine rankings. For content creators and marketers, this is a golden opportunity to tap into a platform that has already established its credibility.

  3. User-Friendly Interface: boasts a user-friendly interface that simplifies the submission process. Whether you are a seasoned content creator or a novice, the platform ensures a smooth and hassle-free experience, allowing you to focus on crafting compelling content.

  4. Diverse Content Categories: To cater to a wide range of interests and industries, offers diverse content categories. Whether your expertise lies in technology, business, health, or lifestyle, there's a suitable category for your content. This diversity not only broadens the audience but also creates a dynamic ecosystem for knowledge exchange.

  5. SEO Benefits: Leveraging the high Domain Authority of can significantly impact your website's SEO. Backlinks from authoritative sites play a crucial role in search engine algorithms, and by contributing content to, you have the opportunity to acquire valuable backlinks that can enhance your website's visibility.

III. The Benefits of Guest Posting on

  1. Enhanced Visibility: Submitting content to a platform with a DA of 50 opens the door to a broader audience. Your content is more likely to be discovered by users actively seeking information in your niche, contributing to increased visibility for your brand or personal brand.

  2. Credibility and Authority: Associating your content with a platform like adds a layer of credibility to your work. It signals to your audience and search engines that your content is deemed valuable by a reputable site, establishing you as an authority in your field.

  3. Networking Opportunities: Guest posting is not just about publishing content; it's also an opportunity to connect with other content creators, businesses, and thought leaders in your industry. provides a platform for networking, potentially leading to collaborations, partnerships, and increased exposure.

  4. SEO Boost: Backlinks from high-authority sites are a powerful SEO tool. By contributing to, you can improve your website's SEO performance, leading to better rankings on search engines and increased organic traffic.

IV. How to Get Started with

  1. Create an Account: To begin your guest posting journey on, create an account on the platform. This will give you access to the submission process and other features offered by the site.

  2. Choose a Relevant Category: Select the category that aligns with the content you want to share. This ensures that your content reaches the right audience and fits seamlessly into the platform's diverse ecosystem.

  3. Craft Compelling Content: The success of your guest post depends on the quality of your content. Craft a well-researched, engaging, and informative piece that adds value to the readers and reflects positively on your expertise.

  4. Follow Submission Guidelines: Each platform has its own set of guidelines for guest submissions. Pay close attention to's guidelines to ensure that your content meets the platform's standards. This includes formatting, word count, and any specific requirements outlined by the site.

  5. Utilize the Author Bio Section: Don't overlook the author bio section when submitting your content. This is an opportunity to introduce yourself to the audience and include relevant links to your website or social media profiles, further enhancing your online presence.

Frequently Asked Questions (FAQs):

Q1: Is guest posting on completely free?

Yes, offers a free guest posting service, eliminating any financial barriers for individuals and businesses looking to share their content.

Q2: How can I benefit from the high Domain Authority of

The high Domain Authority of contributes to better search engine rankings and increased visibility. By contributing quality content, you can leverage this authority to enhance your own website's SEO performance.

Q3: Are there specific guidelines for guest submissions on

Yes, has specific guidelines for guest submissions. It is essential to carefully review and adhere to these guidelines, ensuring your content meets the platform's standards.

Q4: Can I include links to my website or social media profiles in the guest post?

Yes, the author bio section in your guest post submission is an opportunity to include relevant links to your website or social media profiles, enhancing your online presence.

Q5: How can I connect with other content creators on

Guest posting on not only allows you to share your content but also provides a platform for networking. Engage with other contributors, businesses, and thought leaders to explore collaboration opportunities and increase your exposure.

Similar Posts